Here are few more photos of the prototype FR-D front motor - rear drive conversion kit for the Yokomo Drift package. It is being tested by some of Japans best RC drifters
Look for it in September.

Team Magic released another version of their chassis, The E4D-II. It comes with black carbon fiber, some silver alloy bling, 48*degree turning radius axles, 6*degree caster hubs, adjustable turnbuckles for camber and more shock mount positions on the arms. It is available as a kit or as a RTR with choice of 5 different shells. 
The electronics are: H.A.R.D transmitter and receiver, 60A-ESC, servo, 6.5T brushless motor. Battery not included.
This will work with their mid motor conversion kit.

Wrap-Up next RC is working on a prototype Front motor conversion chassis, THE FR-D*.  This will be the first for Wrap-Up Next at attempting a chassis conversion build. The chassis is still in early developmental stages but photos were released in the July 2012 issue of RC Magazine Japan. This will be a conversion to the Yokomo Drift package chassis.  
Here is what Wrap-Up Next says about their prototype:
"FR Conversion Kit is the ultimate wrap-up to pursue the real NEXT is the theme. Front motor follows the layout of the vehicle (engine) and shaft drive.
Innovative drive system without a spur, pinion gear arranged four. 
Fully symmetrical design of the left and right symmetry (with separate battery) Pack can be installed straight, short lipoproteins, a Separate battery.
(And the conversion is scheduled separately) in the simultaneous development of strut front suspension and innovative" 
This could be one of the first true 2WD conversion to be released. Will keep you posted.

Kazama Auto had so much success with their StreetJam conversion kit the "GP-X" they are trying it again. This time they will be releasing a Spidercks conversion chassis for the Yokomo drift package. "The Spidercks GS-X" conversion will use the OTA-r31 front suspension. The kit will include black upper and lower carbon decks. and R31 front suspension. The rest of the chassis will be used from the drift package.
This is a nice upgrade for the Yokomo drift package.
Retail price 250. 

These are photos of a blinged out GS-X conversion. Here you see R31 front and rear hubs, steering knuckles and universals, and possibly Kazama prototype Shock towers. 

Tech Racing has released a drift spec silver carbon graphite conversion kit for Tamiyas Ta06. This conversion kit comes with:
2mm silver carbon high traction main chassis
2mm silver carbon high traction upper deck
3mm silver carbon heavy duty dampers stays.
Look for it at RaceDriftJapan.

Wrap-Up Next has released a clear protective sheet to cover the bottom chassis plate of most 1:10 scale RC cars and trucks. They are made of a special tear resistant polyurethane film and are very durable. It has superior strength, flexibility, resilency and transparent. The protective sheets will be available in 125mm x 175mm. and 125mm x 350mm You can use this as a body/shell protectant too. 
Wrap-Up Next has also released a heat sink wrap for brushless motors. This film comes in black and measures 40mm x 113mm.
Simply peel and wrap.  

Active Hobby released a front motor conversion a few weeks back. Well they have stepped it up a little more by releasing the conversion in 2 new colors. The new conversion kit colors are red and black alloy. 
They are ready for shipping.

Square RC is planning on releasing a 2 new versions of their Tamiya Ta05 chassis conversion.

SP-II SDC- 105
SP-II SDC-105R  High-grade 
Both will be Countersteer ready.
* Blue Aluminium
* Full Counter Model!
Full Counter Special Model! Easy to roll and F&R ratio can be adjusted with set pulleys. 
Newly designed Steering Crank and Aluminium Knuckle with Extension. 
x1 adjutable tensioner in front and x2 in rearUsing 3.6mm Thickness High Quality Carbon Damper Stay
Adjustable Carbon Battery Holder
Pulley 18, 2, 22, 30T (resin material) For Ball Diff, 40T (Ball Diff / Front One way) included.
Kits includes following items:
2mm Main Black Carbon Chassis
2.5mm Black Carbon Upper Deck
Carbon Battery Holder
Aluminium Motor Mount
Aluminium Motor Mount Support
Aluminium Spur Gear Holder
Aluminium Center Pulley Holder
Aluminium Steering Crank
Aluminium Belt Tensioner
Aluminium Servo Stay
Stainless Servo Rod
SVD-35 Aluminium Knuckle with extension
SVD-175F, 157R (Counter Drive Belt F&R)
STA-203H Carbon Front Damper Stays 
STA-204H Carbon Rear Damper Stay
SDC-119F: Aluminium Front Belt Tensioner
Resin Front One Way Diff Pulley 40T
Resin Ball Diff Pulley 40T
Resin Rear Diff Pulley 30T
Resin Center Pulley 18,20,22T
Screws, Bearings etc

R31 House has officially released their new GRK kit chassis. The contents of the kit are as follows:
Main chassis (carbon 2.5mm)
Upper Deck (carbon 3mm)
Damper Stay (carbon 4mm)
Center shaft (carbon)
Front and rear gear box (aluminum)
Front One-Way
Rear solid
Steering rack (aluminum)
Motor Mount (Aluminum)
· Suspension blocks (aluminum)
· Sasupin
· Sasuboru bh
Servo Stay (aluminum)
Servo saver
Post antenna (aluminum)
Battery Holder (Plastic)
Gear, etc. (genuine)
70* degree maximum steering angle
Price estimated is. $373.00

Another front motor drift chassis. Here is a prototype front motor chassis by 3Racing. This will come 1.8% CS out the box, have a 46 degree steering angle, a 3 belt system, 10 degree casters, new style rear diffuser. This chassis is just the prototype so some things may be changed before final production. Pricing is expected to stay low.
Look for it come end of May.
For more info check here.